BNPJQ - MX34, DIAMOND OR CUBIC BORON NITRIDE (SUPP
- MSDS: BNPJQ
- Manufacturer: NORTON CO
- Product Name: MX34, DIAMOND OR CUBIC BORON NITRIDE (SUPP
- National Stock Number: 5130-00N031743
Product Identification
Product ID:MX34, DIAMOND OR CUBIC BORON NITRIDE (SUPP
MSDS Date:06/18/1986
FSC:5130
NIIN:00N031743
MSDS Number: BNPJQ
Responsible Party
WORCESTER, MA 01606-2698
US
Emergency Phone: 617-795-2690
Info Phone: 617-795-2690
Cage: 44197
Contractor
Telephone: 508-795-2690/508-795-5000
Cage: 44197
Ingredients
COPPER (SARA III)
CAS: 7440-50-8
RTECS: GL5325000
Fraction By Weight: <30%
OSHA PEL 0.1MG/M3 FUME;1 DUST
ACGIH TLV: 0.2MG/M3 FUME;1 DUST
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TIN
CAS: 7440-31-5
RTECS: XP7320000
Fraction By Weight: <25%
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3
GRAPHITE
CAS: 7782-42-5
RTECS: MD9659600
Fraction By Weight: <25%
OSHA PEL 15 MPPCF RDUST
ACGIH TLV: 2 MG/M3 RDUST; 9293
CALCIUM OXIDE; (LIME)
CAS: 1305-78-8
RTECS: EW3100000
Fraction By Weight: <5%
OSHA PEL 5 MG/M3
ACGIH TLV: 2 MG/M3
SILICON CARBIDE; (CRYSTOLON)
CAS: 409-21-2
RTECS: VW0450000
Fraction By Weight: <20%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
SILVER (SARA III)
CAS: 7440-22-4
RTECS: VW3500000
Fraction By Weight: < 15%
OSHA PEL 0.01 MG/M3
ACGIH TLV: 0.1 MG/M3
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
FLUORIDES (AS F)
Fraction By Weight: <10%
OSHA PEL 2.5 MG/M3
ACGIH TLV: 2.5 MG/M3
COBALT (SARA III)
CAS: 7440-48-4
RTECS: GF8750000
Fraction By Weight: <65%
OSHA PEL 0.1 MG/M3;AS CO
ACGIH TLV: 0.05 MG/M3;DUST 9293
CHROMIUM, ION (CR 3+); (CHROMIUM SALTS (TRIVALENT))
CAS: 16065-83-1
RTECS: GB6261000
Fraction By Weight: <7%
OSHA PEL 0.5 (CRIII) MG/M3
ACGIH TLV: 0.5 (CRIII) MG/M3
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:(DURING GRINDING) ACUTE: INHAL:
COUGHING, SHORTNESS OF BREATH. SKIN: SOME MAY EXPERIENCE SKIN IRRIT
FROM DUST. EYE: DUSTS MAY IRRITATE EYES. GRINDING MAY CREATE
ELEVATED SOUND LEVELS WHICH MAY AFFECT HEARING. CHRONIC:INHAL:MAY
AFFECT BREATHING CAPACITY.
Explanation of Carcinogenicity:CHROMIUM & CERTAIN CHROMIUM CMPNDS:
GROUP 1 (IARC,NTP)
Effects of Overexposure:SEE HEATLH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR. ARTIFICIAL RESPIRATION AS NEEDED.
OBTAIN MEDICAL ASSISTANCE. INGEST: OBTAIN MEDICAL ASSISTANCE. SKIN:
WASH AFFECTED AREAS WITH SOAP AND WATER. OBTAIN MEDICAL ASSITANCE.
EYE : WASH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15 MIN. OBTAIN
FIRST AID & MEDICAL ASSISTANCE IF NEEDED. OTHER POTENTIAL HEALTH
RISKS: OBTAIN MEDICAL ASSISTANCE.
Fire Fighting
Extinguishing Media:USE WATER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NO APPLICABLE INFORMATION FOUND.
Accidental Release
Spill Release Procedures:NORMAL CLEANUP PROCEDURES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:SEE ANSI STANDARD B7.1. HANDLE WITH
ADEQUATE VENTILATION. SEE OSHA 29CFR1910.94 (VENTILATION) AND 29CFR
1910.1000 (AIR CONTAMINATES).
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATORY PROTECTION (DUST
TYPE) AS NEEDED. FOR NIOSH/MSHA APPROVED DUST RESPIRATORS SEE OSHA
29CFR1910.134.
Ventilation:LOCAL OR MECHANICAL (GENERAL) RECOMMENDED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AS NEEDED HEARING PROTECTION, SEE OSHA 29
CFR 1910.215 (HEARING PROTECTION).
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR TRADE NAME/PART NO: GRINDING WHEELS BOND TYPE. HAZ DECOMP PROD:
SIGNIFICANTLY GREATER THAN GRINDING WHEEL COMPONENTS. COOLANTS MAY
PRODUCE OTHER DECOMPOSITION PRODUCTS.
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:>428F,>220C
Spec Gravity:2-4
Solubility in Water:SLIGHT
Appearance and Odor:SOLID PRODUCT: MAY GIVE OFF ODOR IN USE.
Stability
Stability Indicator/Materials to Avoid:YES
NO APPLICABLE INFORMATION FOUND.
Stability Condition to Avoid:NO APPLICABLE INFORMATION FOUND.
Hazardous Decomposition Products:IN USE, DUST & DECOMP ORGANIC FUMES
GENERATED. IN MOST CASES, MATL REMOVED FROM THE WORKPIECE WILL BE
(SUPP DATA)
Disposal
Waste Disposal Methods:STANDARD LANDFILL METHODS CONSISTENT WITH
APPLICABLE FEDERAL, STATE AND LOCAL LAWS. PRODUCTS WITH LISTED
FLUORIDES MAY HAVE SLIGHTLY SOLUBLE FLUORIDE SWARF.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.